Convection cooling - Hutchinson encyclopedia article about Convection cooling Printer Friendly
The Free Dictionary
966,753,849 visitors served.
?
Dictionary/
thesaurus
Medical
dictionary
Legal
dictionary
Financial
dictionary
Acronyms
 
Idioms
Encyclopedia
Wikipedia
encyclopedia
?

convection
(redirected from Convection cooling)

   Also found in: Medical, Encyclopedia, Wikipedia 0.02 sec.

convection

Enlarge picture
Convection is the transfer of heat energy in a liquid or a gas. The fluid near the heat source is heated, becomes less dense, and rises upwards. Once away from the heat source, the fluid starts to cool, becomes denser, and starts to sink. A kettle uses the principle of convection currents. As the water at the bottom is heated by the element, it rises and brings cool water closer to the element.

Transfer of heat energy that involves the movement of a fluid (gas or liquid). Fluid in contact with the source of heat expands and tends to rise within the bulk of the fluid. Cooler fluid sinks to take its place, setting up a convection current. This is the principle of natural convection in many domestic hot-water systems and space heaters.

Hot-air balloons use convection in order to rise into the air. The air inside the balloon is heated. As the hot air rises, so does the balloon. For the balloon to descend, the air in the balloon is cooled or allowed to escape.

Convection currents in the air allow gliders to fly. The glider gains height from rising, warm currents of air known as thermals. These currents are formed by air being heated by the ground; the heated air becomes less dense and rises.


?Page tools
Printer friendly
Cite / link
Email
Feedback
?Sign in SSL protected
Email:
Password:
Register

? Mentioned in ? References in periodicals archive
 
Heat is managed by a convection cooling system that utilizes heat sinks and fans, while an optional water cooling system is available.
Efficiency: Concrete slab on-grade thermal mass with radiant floor heating system, energy efficient exterior wall material (ten inch aerated autoclaved concrete block units R-30 insulating value) passive solar design, natural cross ventilation with convection cooling through house, reflective radiant barrier installed in roof, high efficiency hot water boiler for radiant floor system and domestic water, photovotaic power system, energy efficient lighting sources
The Astec LPS122 switching power supply can deliver its full rated output of 130W with 30 CFM forced air or 80 W with convection cooling.
 
Hutchinson browser? ? Full browser
 
 
Hutchinson Encyclopedia
?

Disclaimer | Privacy policy | Feedback | Copyright © 2008 Farlex, Inc.
All content on this website, including dictionary, thesaurus, literature, geography, and other reference data is for informational purposes only. This information should not be considered complete, up to date, and is not intended to be used in place of a visit, consultation, or advice of a legal, medical, or any other professional. Terms of Use.